How to extend the life of a small cake filling machine


How can a small cake machine be used to maintain its se […]

How can a small cake machine be used to maintain its service life and make it more effective?

1. Observe the moisture filter and oil mister of the pneumatic combination two-piece before use. If there is too much water, it should be removed in time. If the oil surface is not enough, it should be refueled in time;

2. During the production, it is necessary to patrol the mechanical parts frequently to see if the rotation and lifting are normal, whether there is any abnormality, and whether the screws are loose or not;

3. Often check the equipment ground wire, contact requirements are reliable; often clean the weighing platform; check the pneumatic pipeline for leaks, whether the air pipe is broken.

4. The gear motor is replaced with lubricating oil (fat) every year. Check the chain tightly and adjust the tension in time.

5. If the use is stopped for a long time, the material in the pipeline should be drained.

6. Do a good job of cleaning and sanitation, keep the surface of the machine clean, often remove the accumulation of material on the scale body, pay attention to keep the inside of the electric control cabinet clean.

7. The sensor is a high-precision, high-sealing, high-sensitivity device. It is strictly forbidden to impact and overload. It must not be touched during work. It is not allowed to disassemble for non-overhaul.